Across
1. "W" is the ratio of an SPRT's resistance at a temperature
to its resistance at the __________ point of water.
4. __________ depth affects the accuracy of a PRT.
8. Fixed-point measurements may be adversely affected by a temperature
_________ in the furnace.
9. Calibration uncertainty is only one factor in determining total
__________.
11. The effect that results from removing a probe directly from a very
high temperature to ambient. (two words)
14. Moisture can alter a probe's accuracy when its __________ seal
breaks.
15. Because SPRTs are so __________, they must be handled carefully.
16. __________ is uncertain.
|
Down
2. Quartz sheaths may be sandblasted to prevent light __________.
3. Average (or not very nice).
5. Greek letter used to represent standard deviations.
6. Atmospheric pressure affects the __________ point of liquid
nitrogen.
7. More information is obtained through a rigorous uncertainty
__________ than through a TUR.
10. Standard deviations are often used to quantify aspects of
__________.
12. Gaussian distribution.
13. Root sum __________. |