5618B Small Diameter Industrial RTD

5618

Features

Small diameter sheath, 3.2mm (0.125 in)
Excellent stability
Includes ITS-90 coefficients
NVLAP-accredited calibrated from –200°C to 500°C

Specifications
Resistance	Nominal 100W at 0 °C
Temperature Coefficient	0.003923W/W/ °C nominal
Temperature Range	–200 °C to 500 °C (–200 °C to 300 °C for 5618A-6-X)
Drift Rate	±0.1 °C when used periodically to 500 °C
Sheath Material	316 SST
Leads	22 AWG Teflon, 6’
Termination	Specify
Hysteresis	Less than 0.01 °C at 0 °C when using –196 °C and 420 °C as the end points.
Time Constant	9 seconds max for 63.2 %
Thermal EMF	Less than 25 mV at 420 °C
Calibration	Includes NVLAP-accredited calibration w/ITS-90 coefficients, R vs. T values in 1 °C increments
Size	5618B-12: 305 mm L x 3.2 mm dia. (12 x 1/8 in) 5618B-9: 229 mm L x 3.2 mm dia. (9 x 1/8 in) 5618B-6: 152 mm L x 3.2 mm dia. (6 x 1/8 in)
Probe Accuracy (includes calibration uncertainty and short-term stability)	±0.05 °C over entire range

For secondary level performance with full ITS-90 calibration, Hart’s 5618B series PRTs are an excellent choice for critical temperature measurements. Featuring a 3.2 mm diameter (1/8 in) sheath, these industrial standards probes have reduced response time without compromising precision. This small diameter 5618A probe works well in many applications where immersion depth is limited. Larger diameter probes give more measurement error in short immersion depth applications because they conduct more heat between ambient and the sensor.

With each probe you will receive a full NVLAP-accredited calibration report. On the report you’ll get the test data and the ITS-90 calibration coefficients that you can easily input into your Hart thermometer. If you are using a 1521 Handheld Thermometer readout, we’ll program the coefficients directly into your INFO-CON connector.

The 5618B is also a great probe to use for calibrating your Hart 9132 or 9133 infrared calibrators. In fact, these IR black body heat sources were designed to be calibrated with this type of probe. Now you can calibrate these targets in your own lab!

For use from –200 °C to 500 °C (the six-inch model goes to 300 °C), you won’t find a better industrial standard in this configuration than our 5618B. We recommend using the 5618B PRTs with the 1521, 1522, 1502A, 1529, or 1560 thermometer readouts.

Ordering Information
5618B-12-X	305 mm (12 in) Small Diameter Probe
5618B-9-X	229 mm (9 in) Small Diameter Probe
5618B-6-X	152 mm (6 in) Small Diameter Probe
2601	Probe Carrying Case
X = termination. Specify “B” (bare wire), “D” (5-pin DIN for Tweener Thermometers), “G” (gold pins), “I” (INFO-CON for 1521 or 1522 Handheld Thermometers), “J” (banana plugs), “L” (mini spade lugs), “M” (mini banana plugs), or “S” (spade lugs).

Right click one of the following links and “Save Target As ...” to download the catalog pages/data sheet in Acrobat (.pdf) format.

Catalog page(s)/data sheet

5618B Users Guide

Click to request a quote, catalog, or other literature. Or call us at 1-800-438-4278.

Home | What's New | Products | Support | U.S. Cal Lab | European Cal Lab | Accreditation |Training | Events | Publications |Contact Hart | International | Links | Fun Stuff | Software | Contents

5618B Small Diameter Industrial RTD

Features

Specifications

Ordering Information

Home | What's New | Products | Support | U.S. Cal Lab | European Cal Lab | Accreditation |Training | Events | Publications |Contact Hart | International | Links | Fun Stuff | Software | Contents