Visit other Fluke companies for calibration equipment and services in electrical, power, pressure, flow, RF, and more.
Fluke
DH Instruments
|
|
Demos, Updates, Service Releases, etc. |
This page contains links to demo software, software updates, service releases, and
driver support for new products. Please read the download and installation instructions
before downloading any software.
Quick Links-
Software Home Page
Check Software/Windows
Compatibility Chart and FAQs
Technical Support
Interface-it (Model 9930)
TableWare (Model 9933)
TableWare v2.4
Working Demo
Posted: 09/29/2005
Description: The TableWare Working Demo does everything the
actual software does, except actually calculate coefficients from raw data. The coefficients used
by the working demo are generic and serve only to demonstrate the capabilities of the software.
Serial Number to Install Demo Version: DEMO
Size: 2.1MB
|
Upgrade TableWare V2.x to v2.4
Posted: 09/29/2005
Description: Upgrades TableWare v2.x to version 2.4. A serial number is not required to
install this upgrade if version 2.3 is currently installed. A valid
version 2.x serial number is required to upgrade from previous versions
or to perform a new installation. Contact a Customer Service representative if you purchased v2.x but did not receive a serial number. Proof of
purchase may be required.
Size: 2.1MB
|
TableWare User's Guide
Size: 604KB |
LogWare (Model 9934)
LogWare v1.3
Working Demo
Posted: 12/07/2006
Description: The LogWare Working Demo does everything the
actual software does, except save logged and downloaded data to files and allow
thermometer parameters to be changed. To start a log session with the working demo, a
thermometer is required (Model 1502, 1502A, 1503, 1504, 1521 or 1522).
Serial Number to Install Demo Version: DEMO
Size: 7.7MB
|
Upgrade LogWare V1.x to v1.3
Posted: 12/07/2006
Description: Upgrades LogWare v1.x to version 1.3. A serial number is not required to
install this upgrade if version 1.x is currently installed. A
valid version 1.x serial number is required to perform a new
installation.
Size: 7.7MB
|
LogWare User's Guide
Size: 798KB |
LogWare II (Model 9935)
LogWare II v1.3
Working Demo (NEW!)
Posted: 06/21/2010
Description: The LogWare II Working Demo does everything the
actual software does, except save logged and downloaded data to files and allow
thermometer parameters to be changed. To start a log session with the working demo, a
thermometer is required (Model 1523, 1524, 1529, 1560, 1575, 1575A, 1590,
1594A or 1595A). A firmware upgrade may be required to access
all features of the software!
Serial Number to Install Demo Version: DEMO
Size: 13.8MB
|
Upgrade LogWare II
V1.x to V1.3 (NEW!)
Posted: 06/21/2010
Description: Upgrades LogWare II v1.x to version 1.3. A serial number is not required to install
this upgrade if version 1.x is currently installed. A valid version 1.x
serial number is required to perform a new installation.
Size: 13.8MB
|
LogWare II User's Guide
Size: 1.8MB |
LogWare III (Model 9936A)
LogWare III v2.1
Working Demo
Posted: 06/06/2008
Description: The LogWare III Working Demo does everything the
actual software does. The demo version is limited to 2 concurrent logins for
up to 2 months or 50 total logins, whichever comes first. To start a log
session with the working demo, a logger is required.
Serial Number: No serial number is
required for demo version - leave blank
Size: 137MB
|
Upgrade LogWare III v1.x/2.0 to v2.1
Posted: 06/06/2008
Description: Upgrades LogWare III v1.x or v2.0 to version 2.1.
This version greatly simplifies the server installation process, adds
many new features and resolves many known bugs from the previous
version.
Serial Number: You must obtain a serial
number and license by purchasing the software to complete the upgrade
from v1.x to v2.x - Contact an Application Specialist for details. For updating v2.0 to v2.1, no serial number is
required.
Size: 137MB
WARNING: LogWare III version 1.x and LogWare III version 2.x
client cannot be
installed on the same computer! Installing the version 2.x client
software automatically forces version
1.x to be uninstalled!
|
LogWare III User's Guide
Size: 3.6MB |
MET/TEMP II (Model 9938)
MET/TEMP II v4.4 Working Demo (NEW!)
Posted: 06/21/2010
Description: The MET/TEMP II Working Demo does everything the
actual software does, except record readings to the database and
calculate coefficients. Ten sets of example data are provided for
printing reports. Now includes an updated interface with MET/TRACK.
Support for installation of Chinese Reports is also now included.
Serial Number to Install Demo Version: DEMO
Size: 14.5MB
**** MET/TEMP II MAY NOT
BE FULLY COMPATIBLE WITH WINDOWS® VISTA ****
|
Upgrade
MET/TEMP II v4.x to V4.4 (NEW!)
Posted: 06/21/2010
Description: This download will upgrade MET/TEMP II v4.x to
v4.4. This update adds support for using the new 1523 and 1524 handheld readouts
and 1594A/1595A Super-Thermometer readouts as well as using the reference and UUT inputs of the 914x series Field Metrology Wells and
reference input of the 917x series
Metrology Wells as references and/or scanners.
Support for the Models 9112A and 9112B furnaces has also been added. Now includes an updated interface with MET/TRACK. Support for
installation of Chinese Reports is also now included. A serial number is not required to install this upgrade if version 4.x
is currently installed.
Size: 14.5MB
**** MET/TEMP II MAY NOT
BE FULLY COMPATIBLE WITH WINDOWS® VISTA ****
|
9938 MET/TEMP II User's Guide
Size: 2.3MB |
IO Toolkit (Model 9940)
IO Toolkit v1.0
Posted: 09/26/2008
Description: The IO Toolkit is shipped with supported
instruments. This version includes
support for the new 1523 and
1524 series Readouts. This software is free and does not require a
serial number to be installed.
Size: 7.0MB
|
IR Configuration Utility
Obsolete Software
LogWare III (Model 9936)
Upgrade LogWare III v1.x to v1.2
Posted: 06/27/2006
Description: This download will upgrade LogWare III v1.x to
v1.2. A serial number is not required to install this upgrade if version
1.x is currently installed. A valid version 1.x serial
number is required to perform a new installation.
Size: 17.4MB
|
LogWare III User's Guide
Size: 796KB |
Calibrate-it (Model 9932)
Generate-it (Model 2932)
INFO-CON Download Adapter (Model
9972)
|
Phone: 801-763-1600
